Arrow

Common mode choke series

Inductivity: 1.0 μH - 82.0 μH
Nominal current: max. 3.6 A

EF

Zertifikat

- according to REACH regulation
- according to RoHS regulation
Further certifications / approvals on request!

Common mode choke series

Dielectric strenght W1/W2 2.500 V
• optimized impedance response
• Excellent temperature fluctuation resistance properties
• High electrical safety and long service-life features
• 100 % piece inspection

Common mode choke series

Inductivity: 1.0 μH - 82.0 μH
Nominal current: max. 5.1 A

UU

Zertifikat

- according to REACH regulation
- according to RoHS regulation
Further certifications / approvals on request!

Common mode choke series

Dielectric strenght W1/W2 2.500 V
• optimized impedance response
• Excellent temperature fluctuation resistance properties
• High electrical safety and long service-life features
• 100 % piece inspection

Common mode choke series

Inductivity: 1.0 μH - 82.0 μH
Nominal current: max. 13.5 A

RK

Zertifikat

- according to REACH regulation
- according to RoHS regulation
Further certifications / approvals on request!

Common mode choke series

Dielectric strenght W1/W2 2.500 V
• optimized impedance response
• Excellent temperature fluctuation resistance properties
• High electrical safety and long service-life features
• 100 % piece inspection

Passive PFC choke series

The problem of network disturbance is becoming increasingly important as a result of the increased use of power electronics with increased emissions. In view of the increasing network contamination and their necessary reduction to maintain grid stability, the requirements for device manufacturers to comply with the electromagnetic compatibility are adjusted.

In order to meet these requirements on the grid-connection emissions, HAHN provides you a mains choke series, which enables you within very time to optimize the EMC characteristics of your device, in compliance with the latest standards.

With a power range up to 10 A and a wide range of inductance values, this series covers the range of common device application.

Compliance with EN 61558-2-20, EN 62041-standards and the compliance for glow wire tests and requirements of all materials used in accordance with EN 60335-1 and the usage isolation systems based on Class B and F-insulation class in accordance with UL 1446 makes the integration of these components quickly and easily possible.

Passive PFC Drossel

Passive PFC choke series

Inductivity 1,0 - 15,0 mH
Nominal current: max. 4,7A

EI38

Zertifikat

- according to REACH regulation
- according to RoHS regulation
Further certifications / approvals on request!

Passive PFC Drossel

• Excellent temperature fluctuation resistance properties
• High electrical safety and long service-life features
• High voltage resistance to core
• 100 % piece inspection

• For the standard version with cast housing “0”:
Self-extinguishing cast housing and sealing material

Passive PFC choke series

Inductivity 1,0 - 20,0 mH
Nominal current: max. 5,2A

EI30

Zertifikat

- according to REACH regulation
- according to RoHS regulation
Further certifications / approvals on request!

Passive PFC Drossel

• Excellent temperature fluctuation resistance properties
• High electrical safety and long service-life features
• High voltage resistance to core
• 100 % piece inspection

• For the standard version with cast housing “0”:
Self-extinguishing cast housing and sealing material

Passive PFC choke series

Inductivity 1,0 - 20,0 mH
Nominal current: max. 5,9A

EI42

Zertifikat

- according to REACH regulation
- according to RoHS regulation
Further certifications / approvals on request!

Passive PFC Drossel

• Excellent temperature fluctuation resistance properties
• High electrical safety and long service-life features
• High voltage resistance to core
• 100 % piece inspection

• For the standard version with cast housing “0”:
Self-extinguishing cast housing and sealing material

Passive PFC choke series

Inductivity 1,0 - 20,0 mH
Nominal current: max. 7,7A

EI54

Zertifikat

- according to REACH regulation
- according to RoHS regulation
Further certifications / approvals on request!

Passive PFC Drossel

• Excellent temperature fluctuation resistance properties
• High electrical safety and long service-life features
• High voltage resistance to core
• 100 % piece inspection

Passive PFC choke series

Inductivity 1,0 - 20,0 mH
Nominal current: max. 8,7A

EI48

Zertifikat

- according to REACH regulation
- according to RoHS regulation
Further certifications / approvals on request!

Passive PFC Drossel

• Excellent temperature fluctuation resistance properties
• High electrical safety and long service-life features
• High voltage resistance to core
• 100 % piece inspection

• For the standard version with cast housing “0”:
Self-extinguishing cast housing and sealing material

Active PFC-choke series

The high demand of „passive PFC choke series“ and the demands of our customers for greater achievements enables HAHN to present the „active PFC-choke series“.

The „active PFC-choke series“ takes place in the circuit topologies DCM (Discontinuous conduction mode) and CCM (Continuous conduction mode) application and meets the requirements of the major manufacturers of power regulators.

The new choke series includes an inductance ranging from 50μH to 1000μH, divided into appropriate intermediate steps. This current value of 1.5 A to 16.5 A can be achieved with a frequency response of 500 kHz. The „Active PFC-choke series“ is characterized by very high impulse withstand voltage due to the use of high-quality enamelled copper wire. The withstand voltage value between auxiliary and power winding of the choke series is 2 kV, 2.5 kV from the two windings to the core.

Furthermore HAHN sets on UL listed materials, corresponding to the insulation class F (155 °C). In addition, these materials are compliant to the HAHN insulation system HAHN 155-2 (E237745).

Aktive PFC Drossel

Active PFC choke series

Inductivity: 50 μH - 1.000 μH
Nominal current: 1,5 A - 5,5 A

PQ20

Zertifikat

- according to REACH regulation
- according to RoHS regulation
Further certifications / approvals on request!

Aktive PFC Drossel

• Excellent temperature fluctuation resistance properties
• High electrical safety and long service-life features
• High voltage resistance to core
• Hight impulse voltage resistance
• 100 % piece inspection

Active PFC choke series

Inductivity: 50 μH - 1.000 μH
Nominal current: 2,3 A - 10,0 A

PQ26

Zertifikat

- according to REACH regulation
- according to RoHS regulation
Further certifications / approvals on request!

Aktive PFC Drossel

• Excellent temperature fluctuation resistance properties
• High electrical safety and long service-life features
• High voltage resistance to core
• Hight impulse voltage resistance
• 100 % piece inspection

Active PFC choke series

Inductivity: 50 μH - 1.000 μH
Nominal current: 2,9 A - 12,5 A

PQ32

Zertifikat

- according to REACH regulation
- according to RoHS regulation
Further certifications / approvals on request!

Aktive PFC Drossel

• Excellent temperature fluctuation resistance properties
• High electrical safety and long service-life features
• High voltage resistance to core
• Hight impulse voltage resistance
• 100 % piece inspection

Active PFC choke series

Inductivity: 50 μH - 1.000 μH
Nominal current: 2,7 A - 13,65 A

PQ32

Zertifikat

- according to REACH regulation
- according to RoHS regulation
Further certifications / approvals on request!

Aktive PFC Drossel

• Excellent temperature fluctuation resistance properties
• High electrical safety and long service-life features
• High voltage resistance to core
• Hight impulse voltage resistance
• 100 % piece inspection

Active PFC choke series

Inductivity: 50 μH - 1.000 μH
Nominal current: 4,2 A - 16,50 A

PQ35

Zertifikat

- according to REACH regulation
- according to RoHS regulation
Further certifications / approvals on request!

Aktive PFC Drossel

• Excellent temperature fluctuation resistance properties
• High electrical safety and long service-life features
• High voltage resistance to core
• Hight impulse voltage resistance
• 100 % piece inspection

EMV - Design-Kit

EMC - Design-Kit

Useful for all developers and EMC designers!

Use the service of our design-kit of the product family BVD EI xxx xxxx and BVD PQ xxx xxxx. This design kit contains the most popular passive PFC-chokes from HAHN, including detailed data sheets and characteristics (USB stick included!). Furthermore, you can extend this kit individually from the known HAHN-choke series, the passive, the active PFC-series as well the Common Mode Choke-seires, or an individual version.

Please contact us!