Pfeil
Schaltnetzteilübertrager

Proven model - increased performance!

The options on the newest generation of equipment are growing constantly - whether in the range of White Goods or as in the entertainment industry as well as in the heat-recovery-process. "Internet of Things", the automatization of buildings but also industiral producs are asking for more and more functionality.
Therefore the demand on electronic power increased certainly. That is why developer are challanged with regard to electric power supply.

For further information please click on "Productdetails"!

Flyback converters for Switch Mode Power Supplies

Output Power: 5 - 7 W

EF16/5

Zertifikat

- according to REACH regulation
- according to RoHs regulation
Further certifications / approvals on request!

Schaltnetzteilübertrager

Technical Specifications
• Construction to DIN EN 61 558, DIN EN 60 950
• Creeping distance 8 mm min.
• 100 % unleaded
• UL listed materials
• Insulating material classification B (130 °C)
• Two outputs for connection in parallel or in series

100% piece inspection
• Inductance
• Turns ratio
• Winding direction
• Voltage resistance (50 Hz/ 1 s)

Please ask us for individual design‘s!

Flyback converters for Switch Mode Power Supplies

Output Power: 8 - 16 W

EF20/6

Zertifikat

- according to REACH regulation
- according to RoHs regulation
Further certifications / approvals on request!

Schaltnetzteilübertrager

Technical Specifications
• Construction to DIN EN 615 58, D IN E N 6 09 50
• Creeping distance 4 mm min
• 100 % unleaded
• UL listed materials
• Insulating material classification E (120 °C)
• Two outputs for connection in parallel or in series

100% piece inspection
• Inductance
• Turns ratio
• Winding direction
• Voltage resistance (50 Hz/ 1 s)

Please ask us for individual design‘s!

Switch-Mode-Power-Supply

HS series

HS

ErP

Zertifikat

- according to REACH regulation
- according to RoHs regulation
- according to ErP regulation
Further certifications / approvals on request!

Schaltnetzteil

EBPG ErP

Ecological in design – and solutions based on switch mode technology developed by Hahn. Within the scope of the Eco-Design Directive for Energy related Products, we have expanded our product portfolio for you.

The new HS series by HAHN incorporating switch mode technology has a no load power loss of < 0,15 W and an efficiency of > 70%! It is ideal for applications within the broad input voltage range of 85 – 265 V for power supplies.

Design is short-circuit-proof and wiring is strictly isolated according to DIN EN 61558-2-16 and DIN EN 60950. All components are UL- and DIN EN 60335-compliant. The power of the safety extra-low output voltage is up to 3 W.
Design-Kit

HS-Serie - Design-Kit

Useful for all technicians and developers!

Use the service of our design-kit of the product family HS 400xx!
This design-kit includes all standard supply voltage ranges from 3.3 V to 24 V DC with an output power of 3 W.
The wide-range input of 85 V to 265 V as well as international cetifications (VDE / cULus) enable you to gain international market access within a short time.

Please contact us!

The HAHN - “converter-platform”

Übertrager-Plattform
HAHN offers solutions for product developers of switching power supplies.

In response to the variety of designs which are available on the market, HAHN combines demands and wishes of the developers to quick solutions. Our “converter-platform” supplies switching power supply transformers up to 50 W according to the current requirements of IEC / EN 61558-2-16:2009 for double / reinforced insulation. With constructive suggestions and readily available components for creepage distance requirements> 5.5 mm, our “converter-platform” provides solutions for your power supply developments, regardless of your chosen and used switching regulator topology. With your design proposals or our available simulation and calculation programs, our R&D department realizes and delivers quick solutions. The “converter-platform” additionally accelerates the preparation of documents for quotes, design and manufacturing. Our self-developed measuring devices offer in advance the possibility to pattern your converters perfectly. The use of the same components (covered by our insulation system UL 1446 for insulation class B and F) and same structures in the development and production provides rationalization that will pay off for you. This stands for a quick and economical solution. The implementation of component tests, such as the additional requirements for insulation materials such as the coil former, according to EN 60335-1, paragraph 30, provide significantly more time- and cost savings for the certification of your application.